It is simple in design but very effectively in its performance.
It has been specially designed for the light and medium soils.
The tynes are fitted with the flat braces of 5x8 which resists bending strains in tynes and ensures that spring loaded tynes are accurately spaced for best operation.
These assemblies are fitted in Strong main frame of two rolled channels.
The dual spring loaded tynes fully match the main frame in strength.
SPECIFICATION
KKSLDNT-7
KKSDNT-9
KKSLDNT-11
KKSLDNT-13
Frame (mm)
75x40 (SAIL Channel)
Length (mm / Inches)
1575 (62")
2032 (80")
2489 (98")
2946 (116")
Tyne
25" x 19mm (Forged)
Spring (mm)
WD 10 x OD 49 (25 Coils)
Shovel
3 Hole Reversible
3 Point Linkage (mm)
50x12 (Front & Rear)
Pairs (mm)
50x8 (Flat)
Anchor Pin (mm)
25
Tiller Pin (mm)
27 (Push Tight)
Weight Approx (Kg)
170
206
263
310
*The company reserves absolute rights to modify the specification of machine and components therein without any prior notice.
In 11 Tynes and 13 Tynes Tiller there is an option for Folding system.
It is simple in design but very effectively in its performance.
It has been specially designed for the light and medium soils.
The tynes are fitted with the flat braces of 5x8 which resists bending strains in tynes and ensures that spring loaded tynes are accurately spaced for best operation.
These assemblies are fitted in Strong main frame of two rolled channels.
The dual spring loaded tynes fully match the main frame in strength.
ITCI type Spring Loaded Tyne Assembles take their strength from heavy duty angles in which tines are fitted with the heavy duty spring which once fixed to the immensely strong main frame cannot move or strain out of position.
Spring Loaded Massey Tiller / Cultivator (Srilanka Model)
Features:
It is simple in design but very effectively in its performance.
It has been specially designed for the light and medium soils.
The tynes are fitted with the spring steel braces of 57x7 which resists bending strains in tynes and ensures that spring loaded tines are accurately spaced for best operation.
These assemblies are fitted in Strong main frame of two rolled angles.
The dual spring loaded tines fully match the main frame in strength.
SPECIFICATION
KKSLMT-7
KKSLMT-9
KKSLMT-11
Frame (mm)
Square Pipe (50x50x5) / Angle (50x50x10 or 65 x 65 x 8)
Spring Loaded Medium Duty Tiller / Cultivator (USA Model)
Features:
The above tiller is mainly used in the stony soil & it’s designed in such a way that can be used for the Light and Medium soil conditions. In this two longer frame made of angles are used to facilitate wider spacing of tines. Springs Loaded Tines of this design have a very new looks as they are long from the top looks as the springs are attached through twisted flats
It is simple in design but very effectively in its performance.
It has been specially designed for the light and medium soils.
The tynes are fitted with the flat braces of 50x8 which resists bending strains in tynes and ensures that spring loaded tynes are accurately spaced for best operation.
These assemblies are fitted in Strong main frame of two rolled channels.
The dual spring loaded tynes fully match the main frame in strength.